The Ballistic Tools case mouth and neck tension gage tells you exactly how much neck tension you will have with your reloads.
Measuring neck diameter with calipers is an iffy proposition at best. A small burr on the case mouth, a slight angle to the calipers, or even just placing too much tension on the calipers can give distorted readings. Improper neck tension can make projectile insertion more difficult, or even cause a safety issue if the neck is too loose.
Using our gage solves all those problems. It can knock off a small burr during insertion, and will not distort the round shape of the mouth like calipers will.
This gage is for .338 and .375 calibers.
This case mouth gage is a quick and reliable way to test your neck sizing and neck tension. It is a tool I developed for my own use and I could not do without it. Order yours today.
WARNING: This product can expose you to chemicals including nickel (metallic), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.